Use Dynamic Locking Facility to Control Access from your Telephone Please check with the DE ( Intl ) and ascertain the type of your Exchange.
| FUNCTION | E10B & OCB Exchanges DIAL | EWSD Exchanges DIAL | | i) Password Registration | 123 xxxx xxxx
xxxx :dial twice your 4 digit
password | 123 0000 xxxx
xxxx : your 4 digit
password | | ii) Allow all Calls | 124 xxxx 0 | | iii) Bar only STD Calls | 124 xxxx 1 | | iv) Bar STD Trunk (180) & Internet (172) Calls | 124 xxxx 2 | v) Allow NSD, Cellular, Local &
Trunk Calls | 124 xxxx 3 | | vi) Bar all Out going Calls | 124 xxxx 4 | | vii) Change your Password | 123 xxxx yyyy Where, xxxx : Existing Password & yyyy : New Password. |
Note : Functions (ii) and (v) are not possible from STD Barred Telephone.
Dynamic Locking from ISDN Phone Line This facility is available only to ISDN subscribers of EWSD exchanges.
The procedure is similar as above, but instead of 123 you will have to dial H 23 and
instead of 124, you will have to dial H 24. Also, each set of digits has to be
separated with the digit H. The dialing has to be finished with #.
e.g. to bar STD + Trunk calls + Internet calls from an ISDN line, you will have to dial H 24 H xxxx H 2 #. |
